Power supply lightning protection module（type A）
Electric surge protector of low-voltage distribution system is design according to IEC standard.It has invalidation detection indication,standard modularization installation,changeable lightning protection module and powerful discharge capacity of lightning current.It’s appliable to the protection of buildings’ general supply system against lightning.With 35mm standard guide-way,this lightning arrester is very convenient to be maintained.It connects with the circuit in parallel and has no limit to the power of equipment fixed later.
Technical Parameters List:
|
Model
|
HD-D220M
100A
|
HD-D220M
80A
|
HD-D220M
60A
|
HD-D220M
40A
|
HD-D220M
20A
|
|
Nominal working voltage Un
|
220V
|
220V
|
220V
|
220V
|
220V
|
|
Maximum continuous working voltage Uc
|
275V
|
275V
|
275V
|
275V
|
275V
|
|
Nominal discharge currentIn（8/20ms）
|
50KA
|
40KA
|
30KA
|
20KA
|
10KA
|
|
Maximum discharging currentImax（8/20ms）
|
100KA
|
80KA
|
60KA
|
45KA
|
20KA
|
|
Voltage protection level Up
|
2.5KV
|
2.3KV
|
2KV
|
1.6KV
|
1.2KV
|
|
Dimension
|
36*90*66mm
|
|
Response time Ta
|
≤25ns
|
|
Operating temperature range Tup
|
-40℃to +70℃
|
|
Section of minimum installed conductor
|
6mm2 Multi-folded wire
|
|
Protection grade
|
IP20
|
|
Sheathing material
|
Flame retardant thermoplastic material
|
|
Mode of connection
|
Parallel connection
|
|
Protection mode
|
4+0/3+1/1+1/2+0
|
Installation Method:
Ground the null line repeatedly when long-distance overhead incoming feeder is connected to the building.
Plug the power phase line (L) and null line (N）into corresponding connector of the electric surge protector and make sure it's firm and reliable. Connect the ground terminal of arrester with the ground lead of lightning protection appropriately (recommended earth resistance ≤4Ω).
Suggested specification of the lead wire: no less than 6mm2, short and straight.
